Free Design, Guaranteed Performance
Four generations of plastic packing. Three generations of ceramic heat transfer media. One testing facility in California where we measure what we sell.
Engineering tradeoffs are real. Lower pressure drop usually means worse mass transfer. Higher capacity usually means a larger tower. Lantec products challenge those tradeoffs at the geometry level — and back every Lantec-designed packed bed with a performance warranty.
Q-PAC®, LANPAC®, and NUPAC® for wet scrubbers, air strippers, and absorption columns. Engineered drip point geometry for superior gas-liquid contact at operating velocities conventional packings cannot sustain.
View all plastic packing →MLM® Multi-Layer Media delivers 80% more ceramic per cubic foot than conventional saddles — resulting in 50% bed depth reduction in regenerative thermal oxidizers with dramatically lower pressure drop and reduced plugging.
View all ceramic media →MLM® ceramic media reduces bed depth 50%, lowers pressure drop, and extends media life versus conventional saddles.
High-capacity packings for acid gas, VOC, and odor control. Q-PAC® and LANPAC® outperform conventional packing in efficiency and service life.
LANPAC-XL® delivers the lowest pressure drop in its size class for groundwater VOC removal — minimizing blower energy over system lifetime.
HD Q-PAC® meeting API 421 and EN 858-1 standards for coalescing — without secondary polishing.
Sustained H₂S removal above 98%. No hazardous chemicals, no secondary waste streams.
IMO 2020 SOx compliance packing installed on 150+ vessels worldwide. Open-loop, closed-loop, and hybrid scrubber systems.
Lantec's free design service is available for every application in which Lantec products are used. Provide your flow conditions, contaminant targets, and tower geometry — Lantec's engineers will specify the right packing, calculate bed depth, and tell you what performance to expect. Before you buy.
"All packing supplied to a given project is sold with a performance warranty when the design for that project was supplied by Lantec Products."